Redarc In-Vehicle DC Battery Charge Dual Input 40A

Redarc In-Vehicle DC Battery Charge Dual Input 40A

The REDARC BCDC1240D In-vehicle Battery Charger is the next generation in REDARC’s DC to DC charging technology, with additional features that make it the most advanced dual battery charger on the market.

Featuring a Maximum Power Point Tracking (MPPT) solar regulator, the BCDC1240D will charge from both solar and the alternator simultaneously. With built-in ‘Green Power Priority’ it will select solar charging first, meaning less load on the alternator.

Suitable for 12 or 24-volt vehicle systems, the unit will also work with either standard or variable/smart alternators.

The BCDC1240D also comes with patented charging profiles, including a lithium charging profile. The ‘Dual’ input range will continue to charge all other types of batteries including AGM, GEL, standard lead acid and calcium.

As a guide, the BCDC1240D is used for battery bank sizes over 200AH. For smaller batteries of 75-200AH REDARC recommends the BCDC1225D.

Proven and Tested

The award-winning technology in the BCDC has been independently verified and tested to ensure battery life is maximised, charging your battery to a proven 100%.

Built in Australia and tested for our unique conditions, the DC to DC battery charger will work in the extreme heat of the Simpson Desert, up to 80°C and can handle deep water crossings at Cape York – water, dust and vibration are no match for this charger.

If you’re heading out into the bush and want to get there and back again safely – you can trust REDARC.

Features

  • Separate DC and solar charging inputs
  • Maximises the performance and life of your auxiliary battery
  • Simultaneous DC and solar charging with Green Power Priority
  • Suits 12V/24V standard and variable voltage/smart alternators
  • Suitable for AGM, GEL, standard lead acid, calcium and Lithium (LiFePO4) batteries

Specifications

  • Input (Operating) Voltage: 9 – 32VDC
  • Output System Voltage: 12VDC
  • Maximum Charging Voltage: 15.3V
  • Output Current Rating (Cont.): 40A
  • Input Fuse Rating: 60A
  • Output Fuse Rating: 60A
  • Warranty: 2 years
  • Standby Current Draw: <100mA
  • Output Power: 600W
  • Length: 165mm
  • Width: 120mm
  • Height: 37mm
  • Weight: 1kg

 

You may also like…

Quote Cart